0
📚 WikiCoin
2984 views

5 Popular ASIC Miners for Bitcoin Mining in 2019

  • Denys Serhiichuk
    📚 WikiCoin

    Despite the fact that it is almost impossible to mine Bitcoin with CPU or GPU, this way of earning cryptocurrency remains popular. It is an industry with a turnover of more than a billion dollars. Nowadays, only ASIC-miners are suitable and profitable for Bitcoin mining. In this article, we will analyze and compare the best ASICs in 2019 designed for the most popular cryptocurrency   


5 Popular ASIC Miners for Bitcoin Mining in 2019

Disclaimer: The opinion expressed here is not investment advice – it is provided for informational purposes only. It does not necessarily reflect the opinion of U.Today. Every investment and all trading involves risk, so you should always perform your own research prior to making decisions. We do not recommend investing money you cannot afford to lose.

Contents

The strongest influence on the cryptocurrency market occurred in January 2018, when most digital assets collapsed in price. At that time people expected a drop in popularity for mining hardware, but nothing of the kind happened – the demand for ASICs, on the contrary, increased.

However, this is not astonishing, because the complexity of mining the most popular digital assets is always growing, and the miner is supposed to have powerful hardware. In this article, we are going to analyze the top 5 ASICs for Bitcoin mining.

Antminer S15

Antminer S15 28 TH/S – the flagship model of all miners from Bitmain on 7-nm chips – is the most powerful of the new products released at the end of 2018. New miners have increased energy efficiency by only 30% compared to S9. In connection with the use of the new technical process, a more powerful increase in efficiency was expected. Managing miner is now divided into 2 modes: normal and economical. In economy mode, energy consumption will be reduced to 850 W, and the hashrate to 17 Th/s. In this scenario, the new ASIC for Bitcoin will consume 50 W per 1 Th.

Of the new changes, the S15 model has an additional power saving mode and consumes almost 2 times less power, while the hashrate also drops almost 2 times.

Antminer S9

Antminer S9
Antminer S9 image by Wikimedia Commons

Bitmain Antminer S9 is the most famous and common miner, designed for Bitcoin mining or other crypts using the SHA-256 algorithm. It was released in the summer of 2016 and has since been repeatedly “buried”, but continues to enrich miners.

Among the most interesting characteristics, we note the hashrate of 13.5TH/s, power consumption of 1,350W and two fans of 120 mm with a rotation speed of up to 6 thousand rpm. The device has 189 chips on a 16nm chip. For the future, you can take S9j, which already gives 14.5 terahash per second.

We can say that Bitmain Antminer S9 is still relevant in 2019. Of course, it no longer gives such a powerful profit, but its price has dropped at least three times, so most miners can afford it.

Given the payback period, as well as the prospects of SHA-256 algorithm and the demand for Bitcoin, this ASIC can still be considered as a budget entry to mining cryptocurrency.

👉MUST READ

Top Cryptocurrencies by Mining Revenue in 2019: Bitcoin (BTC), Ethereum (ETH), Zcash (ZEC), Litecoin (LTC), and Bitcoin Cash (BCH)

Top Cryptocurrencies by Mining Revenue in 2019: Bitcoin (BTC), Ethereum (ETH), Zcash (ZEC), Litecoin (LTC), and Bitcoin Cash (BCH)

Antminer R4

Antminer R4 logo

ASIC miner Antminer R4 is a product of the well-known manufacturer Bitmain, featuring a high hashrate of up to 8.7 TX/s and relatively low power consumption of 845 watts. The device is positioned as ASIC for home use, due to the low noise level without loss of performance and efficiency. While looking for ASIC, special attention should be paid to the payback period and the price you will be guided by when choosing.

Due to a number of changes, the company's employees managed to reduce the noise level without a significant loss of hashrate. The first models appeared on the market by the end of the summer of 2016, but even today their use is relevant.

The price of R4 is relatively inexpensive. The cost starts at $1,560. It has high performance, and electricity consumption is insignificant compared to other analogs.

Canaan Avalon Miner 741

AvalonMiner 741
AvalonMiner 741 image by Wikimedia Commons

Most recently, Canaan Creative presented the miner Avalon 741 – its new ASIC for mining Bitcoin. The successor to the 721st model was to become a direct competitor to S9 from Bitmain. It is quite noisy and requires lots of electricity, but at the same time very productive. ASIC was not lost among competitors even six months later.

Avalon supports 741 to 40 TH/S in series. To achieve it, you need immediately to turn on 7 machines. In single mode, 7+ TH/S works out. The increase, compared with the 721st, was a little more than one terrahash due to:

  • 88 A3212 chips made on 16 nm technology versus 72 of the previous model

  • New cooling system

  • More power lines

ASIC Ebit Miner e10

The main characteristic of this equipment is the high hashrate. It is 18TH/sec. High efficiency is ensured by functioning on 14nm DW1227 chips. Moreover, there is an independent cooling radiator with increased heat dissipation. It is also worth noting the increased degree of reliability of the heat sink.

The miner has the following benefits:

  • Low failure rate

  • Powerful fan

  • Superb aluminum housing

  • Availability of auto cluster management independent of each other

  • The ability to connect more pools and ease of ASIC configuration

Characteristics:

  • Power – 1.62 kilowatt

  • Hashrate – 18 Tx/s

  • 3 years official warranty from the company

  • Operating on the SHA-256 algorithm

👉MUST READ

Top Cryptocurrencies by Mining Revenue in 2019: Bitcoin (BTC), Ethereum (ETH), Zcash (ZEC), Litecoin (LTC), and Bitcoin Cash (BCH)

Top Cryptocurrencies by Mining Revenue in 2019: Bitcoin (BTC), Ethereum (ETH), Zcash (ZEC), Litecoin (LTC), and Bitcoin Cash (BCH)

Things to remember when setting up ASIC

When setting up an ASIC it is worth paying attention to the following factors:

  • Ensure that no moisture gets into the ASIC.

  • The power of the power supply should be sufficient for stable operation; when overclocking, take the power supplies with a margin of 25-40% power.

  • Clean, blow and replace radiators at least once every few months.

  • Watch for errors and the appearance of an “X”, indicating the beginning of problems with the equipment.

  • Diagnostics will help identify damage to the power supply circuit and the loss of chips on the board.

  • Analyze your hashrate level. Its reduction indicates that there is not enough power going to the chip.

To buy ASIC or not?

The situation in the cryptocurrency market is still far from optimal. The rates of most currencies retain volatility and commitment to speculative fluctuations. Due to the long bearish trend, lots of people have sold their hardware. However, in the long-term perspective, Bitcoin mining at ASICs remains a stable source of passive income. As the complexity of the network increases, the remuneration may decrease, but don't let that frighten you, because great risks promise great benefits.

Cover image via www.123rf.com
Join our Telegram channel to get news even faster!

About the author

With more than 5 years of trading, Denys has a deep knowledge of both technical and fundamental market analysis. Mainly, he has started his blog on TradingView where publishes all relevant information and make predictions about top coins.
Thus, his experience is backed up by working in top blockchain related companies such as W12, Platinum Listing & ICO Advisory, ATB Coin, and others.

👓 Recommended articles

This site uses cookies for different purposes. Please set your preferences in Cookie Settings and visit our Cookie policy for more information on how and why cookies are used on this site. Click here for cookie policy

Cookie settings